Conroe Buying Guide: Feeding the Monster
by Gary Key & Wesley Fink on July 19, 2006 6:20 AM EST- Posted in
- Motherboards
High-Performance DDR2
The availability of high-performance DDR2 memory has dramatically increased in the last couple of months. That is understandable when you consider the introduction of AMD AM2 and Intel Core 2 Duo.
We have recently reviewed the Buffalo, Crucial, and OCZ DDR2 on the 955EE Net-Burst processor. Conroe compatibility was validated with those modules and tests were also performed on the Corsair, Kingston, and Mushkin High-Performance DDR2 which were in the lab for review.
To be considered High-Performance, a memory had to be rated at DDR2-1000 or above, and the memory had to be completely stable at DDR2-1067, which will be the next official DDR2 memory speed. These 2GB kits represent the best-performing DDR2 memory you can currently buy for the Core 2 Duo or AM2 platforms.
Each 2GB kit was evaluated for the fastest memory timings that could be achieved at each standard DDR2 memory speed - DDR2-400, DDR2-533, DDR2-667, DDR2-800, DDR2-1067, and the highest 1:2 (DDR2-1067 base) memory speed that could be achieved.
Buffalo Firestix PC2-8000
It is hard to miss the bright red heat spreaders of Buffalo Firestix. Buffalo also reaches DDR2-1100 at the 2:1 (DDR2-1067) ratio, delivering performance that is on par with others in this stratospheric club.
Corsair CM2X1024-8500C5
Corsair DDR2-1066 2GB kits have been our standard for high-performance memory since the launch of the AM2 platform. You can clearly see why we like the performance of this Corsair 2GB kit. It generally reaches the same timings as other top DDR2 in this roundup, but voltages required at each step are generally slightly lower than the average for the group. Corsair also reaches to DDR2-1104 form the 1067 ratio, which is one of the highest results we have seen from DDR2 memory.
Crucial Ballistix CL1116N.LW
The Crucial heatspreaders may be the ugliest color you have ever seen, but the performance of Crucial's Ballistix line is generally pure gold. As the retail arm of Micron, you would expect the Ballistix to be the best-of-the-best, but performance is generally toward the bottom of this top-performing group. All of the other high-performance 2GB kits made it to DDR2-1100 or higher, where the Crucial topped out around 1084. The results, in the end, are all very close, and you will never be disappointed if you do choose the Crucial - particularly if you get some of the special pricing Crucial is famous for providing at their web site.
The availability of high-performance DDR2 memory has dramatically increased in the last couple of months. That is understandable when you consider the introduction of AMD AM2 and Intel Core 2 Duo.
| High Performance DDR2 Specifications | |||||
| Manufacturer | Description (Memory Chips) |
Rated Speed |
Rated Timings |
Rated Voltage |
Cost (2x1GB) |
| Buffalo FireStix |
FireStix PC2-8000 (Micron) |
DDR2-1000 | 5-5-5-15 | 2.1V | $432 |
| Corsair XMS2 |
CM2X1024-8500C5 (Micron) |
DDR2-1067 | 5-5-5-15 | 2.2V | $453 |
| Crucial Ballistix |
CL1116N.LW (Micron) |
DDR2-1000 | 5-5-5-15 | 2.2V | $455 |
| Kingston HyperX |
KHX8500D2K2/1G (Micron) |
DDR2-1067 | 5-5-5-15 | 2.2V | $226 (2x512MB) |
| Mushkin Redline |
2GB XP2-8000 Redline (Micron) |
DDR2-1000 | 4-5-4-11 | 2.2V | $430 |
| OCZ PC2-8000 EL |
PC2-8000 EL Platinum (Micron) |
DDR2-1000 | 4-5-4-15 | 2.2V | $445 |
We have recently reviewed the Buffalo, Crucial, and OCZ DDR2 on the 955EE Net-Burst processor. Conroe compatibility was validated with those modules and tests were also performed on the Corsair, Kingston, and Mushkin High-Performance DDR2 which were in the lab for review.
To be considered High-Performance, a memory had to be rated at DDR2-1000 or above, and the memory had to be completely stable at DDR2-1067, which will be the next official DDR2 memory speed. These 2GB kits represent the best-performing DDR2 memory you can currently buy for the Core 2 Duo or AM2 platforms.
Each 2GB kit was evaluated for the fastest memory timings that could be achieved at each standard DDR2 memory speed - DDR2-400, DDR2-533, DDR2-667, DDR2-800, DDR2-1067, and the highest 1:2 (DDR2-1067 base) memory speed that could be achieved.
Buffalo Firestix PC2-8000
It is hard to miss the bright red heat spreaders of Buffalo Firestix. Buffalo also reaches DDR2-1100 at the 2:1 (DDR2-1067) ratio, delivering performance that is on par with others in this stratospheric club.
| Buffalo Firestix - 2x1GB DDR2-1000 |
||
| CPU Ratio | Memory Speed |
Best Memory Timings (Voltage) |
| (4:3) | 400 DDR2 | 3-2-2-5 1.8V |
| (1:1) | 533 DDR2 | 3-2-3-8 2.1V |
| (4:5) | 667 DDR2 | 3-3-3-9 2.1V |
| (2:3) | 800 DDR2 | 3-3-4-10 2.1V |
| (1:2) | 1067 DDR2 | 4-4-5-14 2.3V |
| Highest Mem Speed (1:2) |
1100 DDR2 | 5-5-5-15 2.35V |
Corsair CM2X1024-8500C5
Corsair DDR2-1066 2GB kits have been our standard for high-performance memory since the launch of the AM2 platform. You can clearly see why we like the performance of this Corsair 2GB kit. It generally reaches the same timings as other top DDR2 in this roundup, but voltages required at each step are generally slightly lower than the average for the group. Corsair also reaches to DDR2-1104 form the 1067 ratio, which is one of the highest results we have seen from DDR2 memory.
| Corsair XMS8505v1.2 - 2x1GB DDR2-1000 |
||
| CPU Ratio | Memory Speed |
Best Memory Timings (Voltage) |
| (4:3) | 400 DDR2 | 3-2-2-5 1.8V |
| (1:1) | 533 DDR2 | 3-2-2-8 2.1V |
| (4:5) | 667 DDR2 | 3-2-3-3-9 2.1V |
| (2:3) | 800 DDR2 | 3-3-3-11 2.15V |
| (1:2) | 1067 DDR2 | 4-4-4-14 2.2V |
| Highest Mem Speed (1:2) |
1104 DDR2 | 5-5-5-15 2.35V |
Crucial Ballistix CL1116N.LW
The Crucial heatspreaders may be the ugliest color you have ever seen, but the performance of Crucial's Ballistix line is generally pure gold. As the retail arm of Micron, you would expect the Ballistix to be the best-of-the-best, but performance is generally toward the bottom of this top-performing group. All of the other high-performance 2GB kits made it to DDR2-1100 or higher, where the Crucial topped out around 1084. The results, in the end, are all very close, and you will never be disappointed if you do choose the Crucial - particularly if you get some of the special pricing Crucial is famous for providing at their web site.
| Crucial Ballistix - 2x1GB DDR2-1000 |
||
| CPU Ratio | Memory Speed |
Best Memory Timings (Voltage) |
| (4:3) | 400 DDR2 | 3-2-2-5 1.8V |
| (1:1) | 533 DDR2 | 3-2-3-8 2.0V |
| (4:5) | 667 DDR2 | 3-3-3-10 2.1V |
| (2:3) | 800 DDR2 | 4-3-4-11 2.1V |
| (1:2) | 1067 DDR2 | 4-4-5-14 2.35V |
| Highest Mem Speed (1:2) |
1084 DDR2 | 5-4-5-15 2.35V |
Facebook
Twitter
RSS
123 Comments
View All Comments
WynX - Monday, August 21, 2006 - link
Great article!!!Really waiting for the nforce 5 series (to be mature too).
wheelconnector - Saturday, August 19, 2006 - link
Heyon the review here it says that the 975xbx can support ddr2 800MHz memory speeds, but anywhere else that I've checked, claims that the board only supports speeds upto 667MHz. Can the board take 800MHz out of the box? or will I have to mess around with it to accept the RAM?
thanks a lot
LeeKay - Wednesday, August 9, 2006 - link
I hope u still have your mushkin XP2-8000 (redline) and never sent it back.Here is my hardware.
--------------------
P5N32-SLI SE Deluxe / P5B Deluxe.
Asus Silent tower CPU cooler.
E6600 Processor.
2x1GB Mushkin Redline DDR2 1000Mhz / 2x1GB OCZ Platnium 800MHZ
2x 150GB Raptors,
1x Seagate 300GB Drive,
Powerstream 600Watt PSU
2x EVGA 7950GX2
Coolermaster Stacker.
Plexter SATA 755 Drive
Liteon IDE drive
Mitsumi Floppy Drive
Creative Labs X-Fi Extreme gamer.
Here is my problem..
P5N32 SLI SE DELUXE
I put 2 sticks of ram in the system with the video card will not post. I have to remove one stick of ram and leave one stick in B1 or B2. It will not boot from a cleared bios with a stick in A1 or A2. I then have to go in the bios and set the memory below or at 800Mhz for it to post with 2 sticks of ram in it. Even then when I put the two sticks in and go to the bios it shows only 1024MB or system ram. But the post screen clearly shows 2048. There is nothing wrong with this memory. It ran fine with the P5B motherboard.
When using the OCZ it posts no problem but again shows 2048MB at post and in bios and the OS only shows 1024MB Avalible.
Asus Tech support is the worst in the world. They instantly tell you its a faulty board this and that. But its not its the bios I am 100% sure it is.
Could you Anandtech please setup a test bed with the 0121 bios and try it. If it has no issue could you please try 0204 revision and then tell me. I have the same motherboard revision as you show in the picture.
Thanks in advance.
Bugs66 - Wednesday, August 2, 2006 - link
I see more and more older boards with Core 2 Duo support. Such as the Asus P5PE-VM which is 865G, AGP, and DDR400. I am very curious how performance is hit using the older chipset. These boards are great for folks who do not want to toss their RAM, video card, etc unless there is a huge difference.Thanks for the great writeup.
trajan - Saturday, July 29, 2006 - link
The article mentions these will be coming out soon for socket 775/Conroe. Anyone know when? I've been surfing around for hours trying to find info on it. I know NVidia has made the NForce 500s for Intel but none of the board manufacturers lists any info at all.Just trying to decide if I should go ahead and get the ASUS P5N32-SLI Deluxe (I want to run SLI) or if it's only a short wait for something better.. !
Thanks
rallyhard - Monday, July 24, 2006 - link
Thanks for the great review.I was going back and referencing some information from it today and noticed that in the P5W-DH Deluxe Basic Features table, you have the number of IDE ports listed incorrectly as one. There are actually two ports, one provided by the JMicron JMB363, and the other from the ICH7R southbridge. I got that info from the Asus website.
Is that the other IDE port over below the last PCI port?! If so, that's rediculous.
But this is one of very few Core 2 Duo supporting motherboards that I've seen that have 2 IDE ports, so I might just have to get it.
Gary, I look forward to the upcoming review you mentioned earlier in these comments of the Biostar motherboard with the VIA VT6410 controller. IDE performance continues to be important to me, and will for quite some time with the investment I've already made in hard drives. NEVER AGAIN will I get burned by an under-reviewed, underperfoming chip like the IT8212F!
Thanks again for your quality reviews.
thedjvan - Sunday, July 23, 2006 - link
I am very impressed with this guide, looks like a lot of hard work went into it!I have a question though. I am using the release of Conroe as an excuse to build a whole new system. After reading your guide in addition to others, I've decided on the E6700 and the DFI board (as I don't plan on OCing much, if at all).
However, the video card I had chosen is a X1900XTX, as I have read many bad reviews on the 7900 series having assorted problems with heat and other issues.
Now, having read this, I see that Conroe isn't playing nice with my chosen vid card, possibly due to driver issues. My question: Have you guys received any word from ATI, or has a new driver been pushed out yet that brings its performance up to par where it should be? There's absolutely no reason the Nvidia card should be blowing it away, especially on HL2 and other typically ATI friendly games.
If not, should I forget the ATI card and take a chance on one of the Nvidia cards, or simply go with the ATI card and hope they push out new drivers soon? The AMD/ATI aquisition further complicates the situation... I somehow doubt they'd do any favors for intel based systems.
thedjvan - Sunday, July 23, 2006 - link
No edit button :(I meant a X1900XT, not the XTX version. I'll keep my $100, thanks :)
thedjvan - Sunday, July 23, 2006 - link
Sorry, one more quick question. Is the Zalman CNPS9500 compatible with the Conroe?Gary Key - Sunday, July 23, 2006 - link
Yes...works very well by the way. ;-)